端盖、安装适配器和配件


  • Littelfuse Cover  Mounting Adapters and Accessories

    NDS

  • The NDS-8 is an 8-pin, 35 mm DIN rail or surface mount octal socket. The NDS-11 is an 11-pin 35 mm D...更多

  • 输入
    电压(V):
     10A @ 300VAC

  • 安装方法: Surface mount with two #6 (M3.5 x 0.6) screws or DIN rail mount

  • 暂无信息

  • Littelfuse Cover  Mounting Adapters and Accessories

    NEMA-3R

  • Metal NEMA-3R electrical box with lenses for viewing the single-phase pump protection relay status l...更多

  • 端接类型: Four knockouts: 1/2 in and 3/4 in (one on each side and two on the bottom)

  • 安装方法: Surface Mount (four pre-drilled concave holes)

  • 尺寸规格: 6.00 H x 6.00 W x 4.50 D (152.4 x 152.4 x 114.3 mm)

  • Littelfuse Cover  Mounting Adapters and Accessories

    OT

  • The OT08PC is an 8-pin 35 mm DIN rail or surface mount octal socket rated at 10A @ 600VAC. The OT11P...更多

  • 输入
    电压(V):
     10A @ 600VAC max., 10A @ 300VAC max.

  • 端接类型: For use with 12 to 22 AWG (3.2 to 0.33 mm2) wire sizes

  • 安装方法: Surface mount with two #6 (M3.5 x 0.6) screws or DIN rail mount

  • Littelfuse Cover  Mounting Adapters and Accessories

    P1023

  • P1023 Mounting Brackets for the 2 x 2 or 2 x 3 timers and are screw or DIN rail mount. See datasheet...更多

  • 安装方法: Supplied with two #10 screws for 0.75 in. (19 mm) and 1 in.(25.4 mm) thick modules

  • 暂无信息

  • 暂无信息

  • Littelfuse Cover  Mounting Adapters and Accessories

    RM COVERS

  • Steel enclosure for protecting a Littelfuse RM1000 remote communications monitor from adverse affect...更多

  • 安装方法: Use RM-1000 hardware

  • 尺寸规格: 6.40 in H x 6.30 in W x 1.70 in D (162.6 x 160.0 x 43.2 mm)

  • 重量(磅/克): 1.4 lbs. (22.4 oz. 635.0 g)

A variety of protection relay retrofit adapter plates are available for the products listed below. These adapter plates simplify the process of updating electromechanical or poorly functioning existing relays. Consult factory if you have a specific product to replace that is not featured. Adapters are available in either plate style for panel mounting or drawout style depending on the relay being replaced. Motor, feeder and ground-fault protection upgrades are available for electromechanical or solid state relays that are nearing the end of their life.