|
|
-
-
The DCSA Series is a loop-powered, linear output current transducer that provides an output that is ...更多
-
输出电压: 10 - 30 Vdc
-
端接类型: Wire clamp for 22-14 AWG (0.336mm²-2.5mm²)
-
安装方法: DIN 1 and DIN 3 rail mounting
|
-
-
The ECS Series of single-phase AC current sensors is a universal, overcurrent or undercurrent sensin...更多
-
输入 电压(V): 120 Vac, 230 Vac, 24 Vac, 24 Vdc, 120VAC, 24VDC
-
输出 型式: Isolated SPDT, Isolated SPDT
-
端接类型: 0.25 in. (6.35 mm) male quick connect terminals (5), 0.25 in. (6.35mm) male quick connect terminals (5)
|
-
-
The ECSW Series of single-phase, AC window, current sensors includes adjustable overcurrent and unde...更多
-
输入 电压(V): 120 Vac, 230 Vac, 24 Vdc, 120VAC
-
输出 型式: Isolated SPDT, Isolated SPDT
-
延时范围: 0.15 - 7 s adjustable, 0.5 - 50 s adjustable, 0.5 - 50s adjustable
|
-
-
The LCS10T12 connected to the LPM12 or LPMG12 indicator is a low cost, easy to use, go/no-go indicat...更多
-
端接类型: 12 in. (30.4 cm) wire leads
-
重量(磅/克): 0公斤
-
Burden (VA): ≤0.5
|
|
-
-
The LSR-0 is a self-powered load sensor intended for use as a proof relay. It is used to verify that...更多
-
端接类型: 扭矩: 7 in.-lbs.; Wire: 12 - 24 AWG
-
安装方法: Four #6 screws 3/4 in in length
-
尺寸规格: 1.67 H x 2.3 W x 3.56 D in. (42.4 x 58.4 x 90.4 mm)
|
-
-
The LSR-XXX load sensors use current levels to determine feed rates, tool wear, loss of prime on pum...更多
-
输入 电压(V): 115 Vac,230 Vac,24 Vac
-
输出 型式: SPDT
-
端接类型: 扭矩: 7 in.-lbs.; Wire: 12 - 24 AWG
|
|
-
-
The LSRX/LSRX-C Series are AC current sensors designed to energize the output contact whenever 4.5 A...更多
-
输出 型式: SPST - Form A
-
端接类型: 扭矩: 3 in.-lbs.; Wire: 12 - 26 AWG; 0.25 in quick-connect fast-on terminals, Torque: 3 in.-lbs.; Wire: 12 - 26 AWG; Depluggable screw terminals
-
安装方法: 表面安装式
|
-
-
The TCS Series is a low cost method of go/no go current detection. It includes a solid-state output ...更多
-
输出电压: 24 - 240 Vac; +10 / -20%, 3 - 50 Vdc
-
输出 型式: NC,NO
-
端接类型: 0.25 in. (6.3 mm) male quick connect terminals
|
-
-
The TCSA Series is a loop-powered, linear output current transducer that provides an output that is ...更多
-
输出电压: 10 - 30 Vdc
-
端接类型: 0.25 in. (6.3 mm) male quick connect terminals
-
安装方法: 表面安装式,带一个#10 (M5 x 0.8)螺丝
|