FlexMod Battery Isolator Controller 系列 - FlexMod Smart Battery Isolator Controller

External overview image
滚动放大
免责声明

Littelfuse产品并非为以下用途而设计,也不应被用于这些用途:包括但不限于汽车、航空航天、医疗、救生、维生、核设施、高可靠性应用、用于手术植入体内的装置,或者在产品故障或运行无法达到理想状态的情况下会造成人身伤害、死亡或财产损失的任何其他应用。除非在适用的Littelfuse产品文档中已有明确说明。 如果将产品用于相关Littelfuse文件中未明确说明的任何其他用途,则产品不享受Littelfuse质保。 如果将产品用于相关Littelfuse文件中未明确说明的其他用途,则Littelfuse不会为因此造成的任何索赔或损失承担责任。 除非经Littelfuse另行许可,否则Littelfuse产品的销售和使用应遵守Littelfuse销售条款与条件。 "Littelfuse"包括Littelfuse, Inc.及其所有附属实体。

The FlexMod Smart Battery Isolator Controller unit monitors two battery banks and controls one or more relays or contactors to make sure starting power is protected by isolating the starting and auxiliary battery banks. Turns any electromecanical solenoid or relay into a battery isolator and works with ECM controlled alternators. System will disconnect load after 1 sec of excessive current, and auto-recover after 10 seconds.

Programmable unit can be setup with custom parameters by select authorized distributors.

特征和优势

  • Compact design (4" x 3" x 1") unit is waterproof, dustproof and vibration-proof. Mounts anywhere on a vehicle, even places where road-splash is a problem. Sealed to IP67 standard.
  • Isolates main and auxiliary batteries when system voltage drops below 12.7 Vdc, and automatically reconnects battery banks at 13.2 Vdc. Preserves starting power; eliminates downtime and jump starts due to dead batteries.
  • Start assist feature provides boost to starting battery, when needed.
  • Compatible with modern electronically controlled alternators (some diode Battery Isolators are not). Smart Battery Isolator Controller eliminates false battery warnings created by diode isolators.
  • Status light output drives remote light, informing operator when banks are connected
  • Unit is autoranging - senses 12V or 24V systems.
装配: Four 9/32" (7.2mm) dia. holes
尺寸: 4.0 x 2.7 x 1.3" (102 x 69 x 33mm)

请在下方查看规格、认证和存货情况并订购零部件

Catalog #Current Rating (Continuous) in AmpsVoltage Rating MaxDetailsIngress ProtectionHousingAgency Approval - HumidityAgency Approval - ShockAgency Approval - VibrationSamplesCompare
产品号额定电流(连续),单位为安培最大额定电压详情入口保护外壳机构认证 - 湿度机构认证 - 冲击机构认证 - 振动样品比较
48540 32IP67Blue Thermoplastic0-90% RHSAE J145510-500 Hz订购
48540-01 10 A0 to 90% RH
48740-01 10 A0 to 90% RH
48540-01-BX
已淘汰: 2021 -08-10
1032IP670 to 90% RHSAE J145510-500 Hz
48740
已淘汰: 2019 -01-10
10IP67Blue Thermoplastic0 to 90% RHSAE J145510-500 Hz

  • Showing 1 items
如要索取产品环境信息,请填写 产品环境信息申请表