MRPR-8-27-38 - MRPR-8系列

系列: MRPR-8
更换为: MRPR-20-27-38
有问题？ Contact Littelfuse Support
Reed_Switches_MRPR_8_Hi_Res
滚动放大
免责声明

Littelfuse产品并非为以下用途而设计，也不应被用于这些用途：包括但不限于汽车、航空航天、医疗、救生、维生、核设施、高可靠性应用、用于手术植入体内的装置，或者在产品故障或运行无法达到理想状态的情况下会造成人身伤害、死亡或财产损失的任何其他应用。除非在适用的Littelfuse产品文档中已有明确说明。 如果将产品用于相关Littelfuse文件中未明确说明的任何其他用途，则产品不享受Littelfuse质保。 如果将产品用于相关Littelfuse文件中未明确说明的其他用途，则Littelfuse不会为因此造成的任何索赔或损失承担责任。 除非经Littelfuse另行许可，否则Littelfuse产品的销售和使用应遵守Littelfuse销售条款与条件。 "Littelfuse"包括Littelfuse, Inc.及其所有附属实体。

配20.32mm长x2.84mm直径(0.800" x 0.112")玻璃外壳的微型常开开关。 能切换高电压和高功率电路，最高为265Vac或50VA。 额定电流为2.5A，额定开关电流为1A。 可供选择的灵敏度范围为22-43 AT。 最低1010欧姆的高绝缘电阻，低于100毫欧姆的接触电阻。 磁簧继电器、限位传感、电信和白色家电应用的理想之选。 能切换全球电源电压。

功能与特色:

  • 常开开关，最大切换电压和电流分别为265Vac和0.7A（功率最高50伏安）
  • 最小击穿电压：750Vdc
  • 可供选择的灵敏度范围为22-43 AT

特色:

  • 密封开关触点不受外界环境影响，也不会影响外界环境
  • 能切换全球电源电压
  • 触点的闭合不需要工作电流

应用:

  • 磁簧继电器
  • 限位开关
  • 电信
  • 白色家电
  • 工业控制

参数 （将鼠标移到目标文字上面可显示详情） 数值
Switching Power (W) 50
Switching Voltage (V DC) 250
Switching Current (A DC) 1
Breakdown Voltage (V DC) 750
Max Contact Resistance (Ω) 0.1
Magnetic Sensitivity (AT) 27 to 38
Body Length (mm) 20.32
Overall Length (mm) 56.64
Switch Type A:SPST-NO
Switching Voltage (V AC) 265
Switching Current (A AC) 0.7
Max Operate Time (ms) 0.75
Max Release Time (ms) 0.3
Resonant Frequency (kHz) 2.1
Replaced By Part Number MRPR-20-27-38
Operating Temperature -20° to 125°C

uricon UR_NWFW2_E471070

CRUicon CUR_NQMJ8_E471070

ATEXicon UL_DEMKO_14ATEX1393U_20220627

cURicon cUR_NRNT8_E47258_100213425

URicon UR_NRNT2_E47258_100213425

pdficon Reed Switch Selection Guide

A quick reference guide to selecting reed switches for electronic applications
pdficon Position and Level Sensing in Washing Machines

A most integral appliance in any home is a washing machine. Washing machines have helped made the chore of cleaning clothes quite effortless.
pdficon Littelfuse Reed Switches MRPR-8 datasheet

pdficon Soldering Temperatures Application Note

This application note applies to all of Littelfuse?s products that are normally soldered to printed circuit boards (PCBs) including all reed switches.
pdficon Extreme Temperature Reed Switch Operation Application Note

Littelfuse reed switches are normally specified to operate in a temperature range of -40 ?C to +125 ?C. T
pdficon Reed Switch and Reed Sensor Activation Application Note

Although a reed switch can be activated by placing it inside an electrical coil many reed switches and reed sensors are used for proximity sensing and are activated by a magnet.
pdficon Inductive Load Arc Suppression Application Note

When a reed switch or reed sensor is used to control an inductive device (relay coil solenoid transformer small motor etc.)
pdficon Catalog Glossary Reed Switch Terms Application Note

Reed Switch Terms Glossary
pdficon Ampere turn versus mT and Gauss Application Note

What is the relationship between AT (Ampere*turn) and Tesla or Gauss? What magnet strength will activate a 15 AT reed switch at 5 mm?
pdficon Vibration Testing and Precautions Application Note

Littelfuse tests sinusoidal vibration according to Mil. Std. 202G Method 204D Test Condition G (10 ? 2000 Hz frequency sweep at 30 G or 0.06 inch double amplitude whichever is less).
pdficon Capacitive Loads Application Note

When there is significant capacitance in a reed sensor reed relay or reed switch circuit the peak current and energy switched by the reed contacts should be considered.
pdficon Reed Switch Extended Shock Capabilities Application Note

The maximum shock specifications in the Littelfuse catalog are very conservative for most switches smaller than the DRxxxx type. T
pdficon Rice Cooker Lid Lock Application Note

The position sensing lid lock ensures that the lid is securely locked in place.
pdficon Storage of Littelfuse Sensor Parts Application Note

The data sheets for Littelfuse parts show temperature ranges for storage. However long term exposure to extreme temperatures in the specified storage temperature range may degrade solderability of terminals.
pdficon Handling of Reed Sensors Relays And Switches Application Note

When used within their capabilities Littelfuse reed sensors reed relays and reed switches provide many years of robust performance
pdficon Measuring Reed Switch Sensitivity and Contact Resistance Application Note

The purpose of this application note is to document the preferred method of reading the sensitivity and contact resistance of Littelfuse reed switches.
pdficon Flow Sensing in Tankless Water Heaters Application Note

Reed switches and sensors are highly effective solutions for flow sensing applications that can be used for detecting the presence of fluid flow in a system or even measure the rate of fluid flow.
pdficon Modifying Reed Switches Application Note

When cutting and forming reed switch leads it is important to use the correct support and cutting tools to avoid causing damage to the glass-to-metal hermetic seals.
如要索取产品环境信息，请填写 产品环境信息申请表。