TDUB3000A - TDUB Series

系列: TDUB
有问题? Contact Littelfuse Support
External overview image
滚动放大
免责声明

Littelfuse产品并非为以下用途而设计,也不应被用于这些用途:包括但不限于汽车、航空航天、医疗、救生、维生、核设施、高可靠性应用、用于手术植入体内的装置,或者在产品故障或运行无法达到理想状态的情况下会造成人身伤害、死亡或财产损失的任何其他应用。除非在适用的Littelfuse产品文档中已有明确说明。 如果将产品用于相关Littelfuse文件中未明确说明的任何其他用途,则产品不享受Littelfuse质保。 如果将产品用于相关Littelfuse文件中未明确说明的其他用途,则Littelfuse不会为因此造成的任何索赔或损失承担责任。 除非经Littelfuse另行许可,否则Littelfuse产品的销售和使用应遵守Littelfuse销售条款与条件。 "Littelfuse"包括Littelfuse, Inc.及其所有附属实体。

TDUB系列结合了数字计时电路与通用电压工作。 电压为24至240VAC和12至24VDC,提供三个范围。 TDUB系列提供拨码开关可选时间延迟,范围从0.1秒到102.3分钟,有三个范围。 其1A的额定输出电流、在多种电压下工作的能力以及宽范围的开关可选时间延迟,使TDUB系列成为过程控制系统和OEM设备的绝佳选择。


工作(断开延迟)
必须在计时之前和计时期间施加输入电压。 启动开关闭合后,输出通电。 启动开关断开(后沿触发)时,时间延迟开始。 输出在计时期间保持通电。 时间延迟结束时,输出断电。 当施加输入电压时,如果启动开关闭合,输出将通电。
重置: 在计时过程中重新闭合启动开关会复位时间延迟。 丢失输入电压会复位时间延迟和输出。

参数 (将鼠标移到目标文字上面可显示详情) 数值
Input Voltage (V) 24 or 120 V ac
Input Tolerance (%) ±20%
Input AC Line Frequency (Hz) 50/60
Output Type Solid state
Output Form NO - closed before and during timing
Output Load Rating (VA) 1 A steady state; 10 A inrush @ 60°C
Output Voltage Drop (V) ≅2.5 V @ 1 A
Time Delay Range 1 - 1023 s in 1 s increments
Reset Time (ms) ≤150
Initiate Time (ms) ≤20
Repeat Accuracy (%) ±0.5% or 20 ms whichever is greater
Setting Accuracy ±2% or 20 ms whichever is greater
Setpoint vs Ambient Temperature and Operating Voltage (%) ≤±5%
Open State Leakage Current (A) ≅5 @230 V ac
Insulation Resistance ≥100
Dielectric Breakdown ≥2000V terminals to mounting surface
Circuitry Encapsulated
Power Consumption ≤2 VA
Termination Type 0.25 in. (6.35 mm) male quick connect terminals
Mounting Method Surface mount with 1 #10 (M5 x 0.8) screw
Operating Temperature -40° to 60°C (-40° to 140°F)
Storage Temperature (F/C) -40° to 85°C (-40° to 185°F)
Humidity 95% relative : non-condensing
Dimensions 2 H x 2 W in. (50.8 x 50.8 mm)
Weight (lbs/g) 0 Kg
Dimensions 2 H x 2 W in. (50.8 x 50.8 mm)
如要索取产品环境信息,请填写 产品环境信息申请表