background-waves

24117-01

产品状态| 有源i
Continuous Duty SPST - 24117-01 AR JPG
24117-01
Continuous Duty SPST - 24117-01 SO Side 1 JPG
Continuous Duty SPST - 24117-01 SO Front JPG
Continuous Duty SPST - 24117-01 SO Bottom JPG
Continuous Duty SPST - 24117-01 SO Top JPG
Continuous Duty SPST - 24117-01 Back JPG
Continuous Duty SPST - 24117-01 SO Side 2 JPG
Continuous Duty SPST - 24117-01 Front JPG
Continuous Duty SPST - 24117-01 SO Back JPG
Continuous Duty SPST - 24117-01 AL JPG

24117-01

SOL 12V CONT 4STUD HN20 UL CH-MX | 系列号：连续工作 SPST
info

The 12 V 65 A Continuous-Duty SPST Series Insulated Solenoid Relay (24117-01) is designed with a PVC-coated plated steel housing, single-pole, single-throw (SPST) circuitry, and normally open contacts.

This insulated solenoid features studs that are electrically isolated from the housing. The heavy-duty, durable contacts and the high contact force developed by the solenoid allow this relay to handle high current loads.

In addition, this model of the Continuous-Duty SPST series solenoid relay an intermittent rating of 750 A make, 100 A break at 10 seconds on, 30 minutes off.

参数数值
额定电流（连续），单位为安培
65
电路
SPST
触点
银奖
正常位置
正常断开型
外壳
Grey PVC Coated Plated Steel
Coil Type
Solenoid
  • 65 A continuous current rating
  • 750 A make, 100 A break at 10 seconds on, 30 minutes off
  • 12 V coil and a coil impedance of 17.5 ohms
  • Insulated coil design electrically isolates the studs from the housing
  • SPST circuitry and normally open contacts
  • Plated steel housing with a PVC coating is sealed to an IP66 rating
  • Two large 5/16"-24 copper power studs and two small #10-32 steel coil studs (control circuit) are heavy and durable
  • Flat bracket
  • Included hex nuts and lock washers are bagged

24117-01资源

显示 1 到 1 的 1 总结果
Share
分享
产品号零件描述RoHS无铅RoHS（2015/863/EU）认证REACH（SVHC's）声明REACH（SVHC's）无卤素IPC-材料声明
24117-01SOL 12V CONT 4STUD HN20 UL CH-MXRoHS

如果您要查找的产品环境信息未出现在此选项卡中，请填写 产品环境信息申请表。