保护继电器与控制目录
浏览我们的综合产品目录,找到适合您应用的保护继电器与控制产品。
This unique microcontroller-based voltage and phase-sensing device constantly monitors the 3-phase voltages to detect harmful power line conditions such as low, high, and unbalanced voltage, loss of any phase, and phase reversal. When a harmful condition is detected, the 460 output relay is deactivated after a specified trip delay.当电源线状况在指定时间内恢复到可接受的水平(重启延迟)后,输出继电器将重新激活。跳闸和重启延迟可防止由于快速波动的电源线状况而导致的误脱扣。
All 460 models feature adjustable 1-30 second trip delay, 1-500 second restart delay, 2-8% voltage unbalance trip point, and one form C contact except where noted.
参数 | 数值 |
---|---|
输入电压(V) | 475 - 600 Vac |
输出形式 | 1 Form A and 1 Form B |
端接类型 | Torque: 6 in-lbs; Wire: Stranded or solid 12 - 20 AWG one per terminal |
尺寸规格 | 3.5 H x 2.08 W x 2.35 D in.(88.9 x 52.9 x 59.7mm) |
重量 (kg) | 0Kg(千克) |
湿度 | 10 - 95%无冷凝,符合IEC 68-2-3标准 |
输入交流线路频率(Hz) | 50 / 60 (50 will increase all delay timers by 20%) |
最大输入功率(W) | 6 |
额定输出负载(VA) | Pilot Duty: 360 VA @ 240 Vac B300; General Purpose: 8 A @ 240 Vac |
过压复位电压(%) | 107% |
过压跳闸电压(%) | 110% |
保护等级 | IP20; NEMA 1 (finger safe) |
重启延迟范围 | 1 - 500 s adjustable |
跳闸延迟范围 | Under/Over and Unbalance Voltage: 1 - 30 s adjustable; single-Phase faults (>25%UB): 1 s fixed |
跳变点精度(%) | ±1% |
欠压复位电压(%) | 93% |
欠压跳闸电压(%) | 90% |
电压不平衡复位(%) | Trip setting minus 1% (5 - 8%); Trip setting minute 0.5% (2 - 4%) |
电压不平衡跳变点(%) | 2 - 8% adjustable |
安装方法 | 35mm DIN导轨或表面安装式(#6或#8螺钉) |
最高工作温度 (°C) | 70 |
最高华氏工作温度 | 158 |
运行温度最低摄氏 | -20 |
最低华氏工作温度 | -4 |
最高存储摄氏温度 | 80 |
最高存储华氏温度 | 176 |
最低存储摄氏温度 | -40 |
最低存储华氏温度 | -40 |
产品号 | 零件描述 | RoHS | 无铅 | RoHS(2015/863/EU)认证 | REACH(SVHC's)声明 | REACH(SVHC's) | 无卤素 | IPC-材料声明 | |
---|---|---|---|---|---|---|---|---|---|
460-575-14 | 3-PHASE VOLT.MONITOR/ 575V/ 1 | 查看更多 |
如果您要查找的产品环境信息未出现在此选项卡中,请填写 产品环境信息申请表。