CP 系列 - Single-Phase Undercurrent Monitor

系列: CP
有问题? 联系Littelfuse支持小组
External overview image
滚动放大
免责声明

Littelfuse产品并非为以下用途而设计,也不应被用于这些用途:包括但不限于汽车、航空航天、医疗、救生、维生、核设施、高可靠性应用、用于手术植入体内的装置,或者在产品故障或运行无法达到理想状态的情况下会造成人身伤害、死亡或财产损失的任何其他应用。除非在适用的Littelfuse产品文档中已有明确说明。 如果将产品用于相关Littelfuse文件中未明确说明的任何其他用途,则产品不享受Littelfuse质保。 如果将产品用于相关Littelfuse文件中未明确说明的其他用途,则Littelfuse不会为因此造成的任何索赔或损失承担责任。 除非经Littelfuse另行许可,否则Littelfuse产品的销售和使用应遵守Littelfuse销售条款与条件。 "Littelfuse"包括Littelfuse, Inc.及其所有附属实体。

The CP-5 is an undercurrent monitor designed to monitor one leg of a 3-phase system. It is commonly used as a tower monitor on center pivot irrigation systems to detect stalled or jammed towers to prevent over watering.

The CP-5 has both an adjustable trip level and an adjustable trip delay timer. When the current is sensed, the Model CP-5 activates its output relay, thus starting the motor/pump. When the current in the monitored power line falls below the userselectable trip point, the unit goes through a trip delay timer and then deactivates the output relay if the monitored current does not recover first.

请在下方查看规格、认证和存货情况并订购零部件

Catalog #Input
Voltage (V)
Output
Form
Termination TypeMounting MethodDimensionsWeight (lbs/g)Input AC Line Frequency (Hz)Output Load Rating (VA)Restart Delay RangeTrip Delay RangeTrip Point RangeStockSamplesCompare
产品号输入
电压(V)
输出
型式
端接类型安装方法尺寸规格重量(磅/克)Input AC Line Frequency (Hz)Output Load Rating (VA)Restart Delay RangeTrip Delay RangeTrip Point Range库存样品比较
CP5460 480 VacSPDT7 in.-lbs. 12 - 18 AWG#8 screws2.93 H x 5.27 W x 2.95 D in. (74.4 x 133.9 x 74.9 mm)0公斤50 / 60 (50 will increase all delay timers by 20%)Pilot Duty: 470 VA @ 600 Vac1 s0 - 10 m0 - 5查看 Order
CP5115
已淘汰: 2020 -10-07
115 VacSPDT7 in.-lbs. 12 - 18 AWG#8 screws2.93 H x 5.27 W x 2.95 D in. (74.4 x 133.9 x 74.9 mm)0公斤50 / 60 (50 will increase all delay timers by 20%)Pilot Duty: 480 VA @ 240 Vac1 s0 - 10 m0 - 5查看
如要索取产品环境信息,请填写 产品环境信息申请表