DCSA20 - DCSA Series

系列: DCSA
有问题? Contact Littelfuse Support
External overview image
滚动放大
免责声明

Littelfuse产品并非为以下用途而设计,也不应被用于这些用途:包括但不限于汽车、航空航天、医疗、救生、维生、核设施、高可靠性应用、用于手术植入体内的装置,或者在产品故障或运行无法达到理想状态的情况下会造成人身伤害、死亡或财产损失的任何其他应用。除非在适用的Littelfuse产品文档中已有明确说明。 如果将产品用于相关Littelfuse文件中未明确说明的任何其他用途,则产品不享受Littelfuse质保。 如果将产品用于相关Littelfuse文件中未明确说明的其他用途,则Littelfuse不会为因此造成的任何索赔或损失承担责任。 除非经Littelfuse另行许可,否则Littelfuse产品的销售和使用应遵守Littelfuse销售条款与条件。 "Littelfuse"包括Littelfuse, Inc.及其所有附属实体。

The DCSA Series is a loop-powered, linear output current transducer that provides an output that is directly proportional to the RMS AC current passing through the LCSC10T12 sensor. The DCSA provides either an analog current or voltage: 4 - 20 mA, 1 to 5VDC, or 2 to 10VDC. Each unit is factory calibrated for monitoring (with the LCSC10T12 connected) in one of four ranges; 0 - 5, 0 - 10, 0 - 20, or 0 - 50A. Zero and span adjustments allow field calibration if needed. The DCSA mounts on both DIN 1 and DIN 3 rails.


See datasheet for operation details.

参数 (将鼠标移到目标文字上面可显示详情) 数值
Output Voltage 10 - 30 Vdc
Output Range 4 - 20 mA or 1 to 5 Vdc or 2 to 10 Vdc
Momentary Output Voltage (V) 40 for 1 m
Output Type Analog current directly proportional to input current
Response Time (ms) ≅300 ms
Repeat Accuracy (%) ±0.25% of full scale under fixed conditions
Current Sensor Range 0 - 20 mA ac; factory calibrated to ±0.5% of full scale
Polarity Units are reverse polarity protected
Insulation Resistance ≥100
Dielectric Breakdown ≥2500 terminals to mounting surface
Zero Adjust (mA) ≅3.75 - 4.25 mA
Temperature Coefficient (% / C) ±0.05%
Termination Type Wire clamp for 22-14 AWG (0.336mm²-2.5mm²)
Mounting Method DIN 1 and DIN 3 rail mounting
Operating Temperature -30° to 60°C (-22° to 140°F)
Storage Temperature (F/C) -40° to 85°C (-40° to 185°F)
Humidity 95% non-condensing
Weight (lbs/g) 0 Kg
Check Stock Yes
如要索取产品环境信息,请填写 产品环境信息申请表