ACBC-120 - ACBC Series

系列: ACBC
已淘汰: 2020 -09-16 供货情况: 已淘汰

已淘汰

有问题? Contact Littelfuse Support
External overview image
滚动放大
免责声明

Littelfuse产品并非为以下用途而设计,也不应被用于这些用途:包括但不限于汽车、航空航天、医疗、救生、维生、核设施、高可靠性应用、用于手术植入体内的装置,或者在产品故障或运行无法达到理想状态的情况下会造成人身伤害、死亡或财产损失的任何其他应用。除非在适用的Littelfuse产品文档中已有明确说明。 如果将产品用于相关Littelfuse文件中未明确说明的任何其他用途,则产品不享受Littelfuse质保。 如果将产品用于相关Littelfuse文件中未明确说明的其他用途,则Littelfuse不会为因此造成的任何索赔或损失承担责任。 除非经Littelfuse另行许可,否则Littelfuse产品的销售和使用应遵守Littelfuse销售条款与条件。 "Littelfuse"包括Littelfuse, Inc.及其所有附属实体。

ACBC-120是一款两用报警控制器/蓄电池充电器。 When there is a loss of 120VAC power, the ACBC-120's primary function as an alarm controller activates. When this power loss occurs, input power is switched to a 12VDC, lead-acid, rechargeable backup battery and a 12VDC alarm consisting of a strobe light and/or a horn is activated. The horn follows a 2 second on/2 second off pattern with a "horn silence" option to turn the sound off. An LED indicator on the unit also signals that the device has entered the alarm mode.

When 120VAC input is present the alarm circuit can be tested and the unit's secondary function as a 12VDC backup battery charger is activated. In fast charge mode, the unit has the capability to source up to 100mA of charging current. However, the device normally charges at a current of 14mA in maintenance mode. The alarm circuit can be tested by pressing the "test" button located on the front of the unit or by activating an external switch via the "alarm contact" pin.

The device has the ability to signal low battery voltage if the voltage drops below 10.5VDC. The device can also detect if no battery is present or if the battery is connected backwards. In either of these cases, the ACBC-120 will signal a battery error and will not attempt to charge.

参数 (将鼠标移到目标文字上面可显示详情) 数值
Input Voltage (V) 120 Vac
Input Tolerance (%) ±10%
Maximum Input Power 2.4 (max.) (fast charge current); 0.4 (typical) (maintenance charge current)
Input AC Line Frequency (Hz) 50 / 60
Input Current Range (A) 0.018 (max.); 0.003 (typical)
Output Form Strobe light / Horn
Output Load Rating (VA) 12 Vdc @ 1 A (max.)
Maintenance Charge Current (mA +/-%) 14 ±50%
Fast Charge Current (mA +/-%) 100 ±10%
Acceptable Battery Type 12 V lead-acid rechargeable
Termination Type 12-pin plug-in; Torque: 20 in-lbs; Wire: 12 - 20 AWG solid or stranded (using SD12-PC socket)
Mounting Method Plug-in socket; Surface mount with #8 or #10 screws (using SD12-PC socket)
Operating Temperature -40° to 60°C (-40° to 140°F)
Humidity 10 - 95% non-condensing per IEC 68-2-3
Dimensions 1.75 H x 2.38 W x 4.13 D in. (44.5 x 60.3 x 104.8 mm)
Weight (lbs/g) 0 Kg
Check Stock Yes
如要索取产品环境信息,请填写 产品环境信息申请表