PC-102CICI-LT - PC-102 Series – Seal-Leak and Overtemperature Detector Series

External overview image
滚动放大
免责声明

Littelfuse产品并非为以下用途而设计,也不应被用于这些用途:包括但不限于汽车、航空航天、医疗、救生、维生、核设施、高可靠性应用、用于手术植入体内的装置,或者在产品故障或运行无法达到理想状态的情况下会造成人身伤害、死亡或财产损失的任何其他应用。除非在适用的Littelfuse产品文档中已有明确说明。 如果将产品用于相关Littelfuse文件中未明确说明的任何其他用途,则产品不享受Littelfuse质保。 如果将产品用于相关Littelfuse文件中未明确说明的其他用途,则Littelfuse不会为因此造成的任何索赔或损失承担责任。 除非经Littelfuse另行许可,否则Littelfuse产品的销售和使用应遵守Littelfuse销售条款与条件。 "Littelfuse"包括Littelfuse, Inc.及其所有附属实体。

PC-102CICI-LT is a seal-leak and over-temperature detector that uses one input to sense seal failures and the temperature input to detect motor overheating. This unit is configurable to suit various probes. Seal input logic (direct or inverted) and over-temperature trip reset (automatic or manual) is DIP-switch selectable. See datasheet for detailed technical characteristics.

参数 (将鼠标移到目标文字上面可显示详情) 数值
Input Voltage (V) 120 Vac nominal
Maximum Input Power 2
Input AC Line Frequency (Hz) 50 / 60
Input Logic Direct or Inverted
Output Form 2 Form C Isolated
Output Load Rating (VA) Pilot Duty: 180 VA @ 120 Vac C150; General Purpose: 5 A @ 240 Vac
Sense Voltage 5 Vdc pulsed (probe)
Sensitivity (Ohms) TEMP input: Selectable 4 fixed; or 4.7 - 100 adjustable with DIP switches; SEAL: 4.7 - 100 adjustable
Termination Type Torque: 6 in-lbs; Wire: 12-20 AWG; Depluggable Phoenix Contact - Series MSTB plugs (or equivalent)
Mounting Method 35mm DIN rail or Surface Mount (#6 or #8 screws)
Operating Temperature -20° to 55°C (-4° to 131°F)
Dimensions 3.5 H x 2.08 W x 2.35 D in. (88.9 x 52.9 x 59.7 mm)
Weight (lbs/g) 0 Kg
Check Stock Yes
如要索取产品环境信息,请填写 产品环境信息申请表