SLR1610A - SLR Series

系列: SLR Series – Solid-State Non-Isolated Relay
已淘汰: 2020 -10-07 供货情况: 已淘汰

已淘汰
有问题？ Contact Littelfuse Support
External overview image
滚动放大
免责声明

Littelfuse产品并非为以下用途而设计，也不应被用于这些用途：包括但不限于汽车、航空航天、医疗、救生、维生、核设施、高可靠性应用、用于手术植入体内的装置，或者在产品故障或运行无法达到理想状态的情况下会造成人身伤害、死亡或财产损失的任何其他应用。除非在适用的Littelfuse产品文档中已有明确说明。 如果将产品用于相关Littelfuse文件中未明确说明的任何其他用途，则产品不享受Littelfuse质保。 如果将产品用于相关Littelfuse文件中未明确说明的其他用途，则Littelfuse不会为因此造成的任何索赔或损失承担责任。 除非经Littelfuse另行许可，否则Littelfuse产品的销售和使用应遵守Littelfuse销售条款与条件。 "Littelfuse"包括Littelfuse, Inc.及其所有附属实体。

SLR系列在控制开关输入和固态输出之间无隔离。 Select the SLR for applications where the control switch is the same voltage source as the load. Provides the noiseless, reliability and long life of a solidstate relay, without the cost of isolation circuitry. Zero voltage switching SLR2 can extend the life of an incandescent lamp up to 10 times its normal life. Random switching SLR1 is normally used for inductive loads. When fully insulated female terminals are used on the connection wires, the system meets the requirements for touch-proof connections.


工作原理
The solid-state output is located between terminals 1 and 2 and can be ordered as either normally open or normally closed, when voltage is applied and S1 is open. When S1 is closed, the solid-state output between terminals 1 and 2 closes (or opens). If S1 is opened, the solid-state output will open (or close).
重置: Opening S1 resets the output to its original state. Reset is also accomplished by removing input voltage.

查看库存

产品文献


参数 （将鼠标移到目标文字上面可显示详情） 数值
Input Voltage (V) 230 Vac
Input Tolerance (%) ±20%
Output Voltage 230 Vac
Output Voltage Drop (V) ≅2.0
Minimum Output Holding Current (mA) ≅50
Output Type Non-isolated Solid state
Output Form SPST; NO
Output Load Rating (VA) Steady state: 10 A; Inrush: 100 A; Output Device: Triac
Power Consumption ≤0.5 W
Insulation Resistance ≥100
Dielectric Breakdown ≥2000 terminals to mounting surface
Open State Leakage Current (A) ≅5
Termination Type 0.25 in. (6.3 mm) male quick connect terminals
Mounting Method Surface mount with one #10 (M5 x 0.8) screw
Operating Temperature -20° to 60°C (-4° to 140°F)
Storage Temperature (F/C) -40° to 85°C (-40° to 185°F)
Humidity 95% non-condensing
Dimensions 2 H x 2 W x 1.51 D in. (50.8 x 50.8 x 38.4 mm)
Weight (lbs/g) 0 Kg
Check Stock Yes

如要索取产品环境信息，请填写 产品环境信息申请表。