免责声明
Littelfuse产品并非为以下用途而设计，也不应被用于这些用途：包括但不限于汽车、航空航天、医疗、救生、维生、核设施、高可靠性应用、用于手术植入体内的装置，或者在产品故障或运行无法达到理想状态的情况下会造成人身伤害、死亡或财产损失的任何其他应用。除非在适用的Littelfuse产品文档中已有明确说明。 如果将产品用于相关Littelfuse文件中未明确说明的任何其他用途，则产品不享受Littelfuse质保。 如果将产品用于相关Littelfuse文件中未明确说明的其他用途，则Littelfuse不会为因此造成的任何索赔或损失承担责任。 除非经Littelfuse另行许可，否则Littelfuse产品的销售和使用应遵守Littelfuse销售条款与条件。 "Littelfuse"包括Littelfuse, Inc.及其所有附属实体。
For any vehicle that needs to use two batteries where one battery is used for starting the engine, while the other is used to power auxiliary loads. This is a common situation in trucks, boats, RVs, police and rescue vehicles, and in ambulances or fire equipment. A selector switch allows use of the first battery, the second battery, or both batteries simultaneously. This provides back-up starting power in an emergency.
功能与特色
These switches combine the functions of Battery Selector and Master Disconnect Switches to give four battery power options:
- Power cut off at the source
- Power On, Battery 2
- Power On, Battery 1
- Power On, both Batteries
Battery selector switches provide a positive battery disconnect, which has many advantages:
- It gives a reliable shutdown of power during maintenance
- The version with the key protects against theft of the vehicle, when unattended
- It helps protect against electrical fires, when the vehicle is not in use, and minimizes battery drain
规格
- 额定: 500A intermittent, 310A continuous, 6-36V DC Electrical ratings on UL labels are conservative. Electrical Ratings Labeled UL 707B
- Use with either alternators or generators.
Make before break design permits operation through the three On positions with the engines running. Engines should always be shut down before turning to Off.
Heavy-Duty Construction Vaporproof, weather-, dust- and corrosion-resistant.
Durable, fracture-resistant high temperature plastic case, knob and insulator.
Switches conform to USCG section 183.410 for ignition protection.
Resistant to impact, and temperature extremes.
Heavy duty copper stud terminals, with brass hexnuts.
Can be surface mounted, or installed through a 3 5/16" diameter hole in the panel.
尺寸规格: Flange: 6" (152.4mm) diameter, overall height 2 5/8" (66.7mm).
端子: 3 copper studs, 3/8" (9.5mm) diameter. Offsite info on Marine Power Generation Offsite info on Marine Dual Battery Wiring